Regulatory Information for Lynx-R
European Economic Area And United Kingdom
Hereby, Lynx Mixed Reality declares that this Hardware is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full declaration of conformity can be found at: https://compliance.lynx-r.com.
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
EU representative
SL PROCESS, 47 rue Marcel Dassault 92514 Boulogne-Billancourt FRANCE
Hereby, Lynx Mixed Reality SAS declares that this Hardware is in compliance with the essential requirements and other relevant provisions of Electrical Equipment (Safety) Regulations 2016 and the Radio Equipment Regulations 2017. The full declaration of conformity can be found at : https://compliance.lynx-r.com.
Restriction or Requirement in the UK: 5150 to 5350 MHz indoor-use only.
Maximum power
WLAN 2.4GHz Band: 2400 MHz ~ 2483.5 MHz: 20 dBm
WLAN 5GHz Band: 5150 Mhz ~ 5350 MHz 23: dBm
5470 MHz~5725 MHz: 23 dBm
5725 MHz~5850 MHz: 13.98 dBm
Bluetooth 2400 MHz ~ 2483.5 MHz: 20 dBm
Federal Communications Commission (FCC) and Industry Canada (IC)
Lynx-R1. FCC ID : 2BBL6-7128 / IC ID : 31098-7128
Compliance Statement
This equipment is tested to comply with FCC (Federal Communications Commission) Standards. For home and office use. This device is for use with NRTL- listed (UL, CSA, ETL etc.) and/or IEC/EN 62368 compliant (CE marked) IT equipment. No serviceable parts included. This device complies with Part 15 of the FCC Rules. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna and increase the distance between the equipment and the receiver.
2. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
3. Consult an experienced radio/TV technician for help.
CAUTION: The FCC requires that you be notified that any change or modifications to the Hardware not expressly approved by the manufacturer could void the user's authority to operate the equipment. The device for operation in the band 5150 - 5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Déclaration de conformité
Cet équipement a été testé pour être conforme aux normes de la FCC (Federal Communications Commission). Cet appareil doit être utilisé avec des équipements informatiques certifiés NRTL (UL, CSA, ETL, etc.) et/ou conformes à la norme IEC/EN 62368 (marquage CE). Aucune pièce remplaçable n'est incluse. Cet appareil est conforme à la section 15 du règlement de la FCC. Cet appareil est conforme aux normes d'exemption de licence RSS d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférences nuisibles, et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences susceptibles de provoquer un fonctionnement indésirable. L'équipement a été testé et déclaré conforme aux limites imposées aux appareils numériques de classe B, conformément à la section 15 du règlement de la FCC. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans les installations résidentielles. Cet équipement génère, utilise et peut émettre des ondes radio et, s'il n'est pas installé et utilisé conformément aux instructions, il peut provoquer des interférences nuisibles aux transmissions radio. Cependant, il n'y a aucune garantie que des interférences ne se produiront pas dans une installation particulière. Si cet équipement provoque des interférences nuisibles à la réception de signaux de radio ou de la télévision, ce qui peut être déterminé en éteignant et en allumant l'équipement, l'utilisateur est encouragé à essayer de corriger les interférences en prenant une ou plusieurs des mesures suivantes :
1. Réorienter ou déplacer l'antenne de réception et augmenter la distance entre l'appareil et le récepteur.
2. Brancher l'appareil sur une prise d'un circuit différent de celui sur lequel le récepteur est branché.
3. Consulter un technicien radio/TV expérimenté pour obtenir de l'aide.
ATTENTION : La FCC exige que vous soyez informé que tout changement ou modification du matériel non expressément approuvé par le fabricant peut annuler le droit de l'utilisateur à faire fonctionner l'équipement. L'appareil fonctionnant dans la bande 5150 - 5250 MHz ne doit être utilisé qu'à l'intérieur afin de réduire le risque d'interférences nuisibles aux systèmes mobiles utilisant les mêmes canaux.
US representative
SL PROCESS, 8525 Gibbs Dr Suite 304 San Diego, CA 92123, USA - Contact : contact@lynx-r.com
Health & Safety
The device is equipped with near infrared (NIR) light emitting diodes (LEDs). They are completely safe to use in any conditions.
It is recommended to take a 5 to 10 minute break every 30 minutes by flipping up the front module of the headset. In case of discomfort, make sure to take more frequent and longer breaks.
Proper Handling Of Waste Electronic Equipment
Waste Electrical and Electronic Equipment (WEEE). This symbol means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Proper recycling of your product will protect human health and the environment.
Caution: Only use a suitable adapter to charge the device.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Battery Information
Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.